Garbage Truck Seat Supplier for Machine Builders and Distributors:Seat Cover Material Listed Model by Model
KL Seating is a garbage truck seat supplier and factory direct manufacturer for refuse truck builders, municipal fleet workshops, distributors and importers. Garbage trucks sit in the ground support and municipal group of our application list, next to sweepers and aerial work platforms.
On a refuse route the seat surface is the part a buyer asks about first, because the seat is wiped down often. This page puts the published cover material of each model side by side, so you can shortlist before you write to us.
Our sheets hold no data specific to garbage trucks and no table that links a truck model to a seat model. Send the truck make and model, photos of the old seat, the base hole pattern and the voltage situation, and we reply with a matching model and its parameter sheet.
- Seat manufacturer since 2007, own brand KL Seating since 2016
- 500,000 seats a year from our own production lines
- ISO 9001:2015, CE, RoHS and REACH certificates
- OEM and ODM service with customized, modular seat systems
In each column: upper square PVC, lower square fabric.
Seat Cover Material: PVC as the Main Cover, Fabric on Four Models
PVC is the main cover material across our whole range. Four models also offer a fabric cover: KL01, YS15, YJ03 and YY03. The other nine models in the lists below are PVC only on their sheets.
- Colors are published for a few models.
- Black is the stated color on KL11, YS15 and YJ03.
- Wherever a sheet gives no color, the color is a question for the factory and goes into the enquiry.
Pick a cover
The chart repeats the sheets. It names no model for any garbage truck.
In each column: upper square PVC, lower square fabric.
Models With a PVC or Fabric Choice: KL01, YS15, YJ03 and YY03
These four models list both covers on their sheets. The published data of each is below, so you can shortlist before you write.
If you choose fabric on one of these four, write the cleaning routine of the cab into the first message. Whether a fabric cover suits that routine is answered by the factory, and this page makes no statement on it.
- 01
KL01
PVC Fabric 50mmMechanical suspension travel- Cover
- PVC or fabric
- Operator weight
- 50–130 kg
- 02
YS15
PVC Fabric 40–110mmSuspension travel. Suspension type not stated on the sheet- Cover
- Black PVC or fabric
- Fore-aft
- 176 mm
- 03
YJ03
PVC Fabric 80mmAir bag suspension travel- Cover
- Black PVC or fabric
- Pump
- 24 V air pump motor
- 04
YY03
PVC Fabric 150mmFore-aft adjustment- Cover
- PVC or fabric
- Operator weight
- 40–120 kg
PVC-Only Models: Nine Models and Their Published Colors
These models are listed as the range our covers are drawn from. The pairing of a model to a particular garbage truck is done against your machine data, and this page names none.
| Swatch | Model | Cover and color on the sheet | Page |
|---|---|---|---|
| KL11 | Black PVC | KL11 forklift seat | |
| YY08 | PVC. The drawing shows black, with yellow, blue and red as further colors | Tractor seats | |
| YS2-8 | PVC. The catalog page shows black and grey | Construction machinery seats | |
| YY53 | PVC. Color not stated on the sheet | YY53 forklift seat | |
| YL02 | PVC. Color not stated on the sheet | YL02 construction machinery seat | |
| YQ40 | PVC. Color not stated on the sheet | YQ40 heavy machinery seat | |
| YQ50 | PVC. Color not stated on the sheet | Construction machinery seats | |
| YY01 | PVC. Color not stated on the sheet | Forklift seats | |
| YL01 | PVC. Color not stated on the sheet | Forklift seats |
Published Colors: Which Models List One
Black is the stated color on KL11, YS15 and YJ03. Wherever a sheet gives no color, the color is a question for the factory and goes into the enquiry.
- KL11
- Black
- YS15
- Black
- YJ03
- Black
- YY08
- BlackYellowBlueRed
- YS2-8
- BlackGrey
- KL01
- YY03
- YY53
- YL02
- YQ40
- YQ50
- YY01
- YL01
No color on these sheets. Ask the factory, and write the color you want into the first message.
Wiping Down a PVC Cover
A PVC surface can be wiped down.
- This page states
- That sentence, nothing more.
- Not on our sheets
- We publish no figure and no claim on stain behavior, resistance to cleaning agents, hygiene treatment or odor, because our sheets contain none.
- How to ask
- If your route work needs a specific cleaning agent, state the agent by name in the enquiry, together with the cover you are considering, and the factory answers for the model you shortlist. Send the cover question and the agent name.
Other Selection Points for a Refuse Truck Seat
The cover comes first on this page, and a few other points follow it.
Getting in and out
Crews climb into and out of the cab many times in a shift. Seat height and the free space in front of the seat are measured on your truck by you. Send the figures, and we reply with the models whose published adjustment ranges fit.
Turning to look
The operator turns the head often, so backrest angle range and headrest availability are read from the parameter sheet of the shortlisted model.
Armrest and seat belt
Both are listed as optional parts on many models. The option list of each model is on its parameter sheet, and anything not listed is a question to the factory.
Look it up by model
Production and Documents
- Foam molded cushion and backrestBoth are molded from foam.
- Precision stamped, robot welded frameThe research and development center checks the frame with CAE in design.
- Assembly of suspension, slide rails and optionsThe chosen options are fitted in assembly.
- Testing and recordsThe testing center covers 3D scanning of base holes and frame outline and a pressure distribution comfort test on the cushion. MES records quality inspection and delivery as one chain.
No test values are published here.
On request we send the parameter sheet of the model, the drawing where one is on file, and copies of the ISO 9001:2015, CE, RoHS and REACH certificates.
OEM and ODM Supply for Refuse Truck Builders and Distributors
- Refuse truck builders
- BringThe cab drawing and the mounting pattern.
- We doThe research and development center works on a customized, modular seat.
- Distributors and importers
- BringThe end customer's truck model and the old seat photos.
- We doThe series goes out under wholesale or private label supply, with models, covers and options written on one sheet.
Garbage Truck Model Match: Send the Machine and the Old Seat
We match from your truck. Distributors send the end customer's truck model and the old seat photos, and the reply returns to the distributor. For the full routine, see seat fitment and compatibility.
- Truck make and model.
- Photos of the old seat from the front, the side and underneath, with the model plate if there is one.
- The base hole pattern or the seat mounting area.
- The voltage situation of the truck, including whether it has a 24 V supply.
- The cover you want, PVC or fabric, with the color, and the cleaning agent used in the cab.
The reply names a model and sends its parameter sheet.
Contact KL Seating About Garbage Truck Seats
Send the truck model, old seat photos, the base hole pattern, the voltage, the cover and the cleaning agent to [email protected], and we reply with the matching model and its parameter sheet. The contact page has the full details.
How to reach us
In the first message
- Truck make and model
- Old seat photos
- Cover and cleaning agent