Street sweeper seats · Adjustment ranges
KL Seating makes street sweeper seats in its own factory and supplies sweeper builders, municipal fleet workshops, distributors and importers. Sweepers sit in the ground support and municipal group of our application list, next to garbage trucks and aerial work platforms. Where several operators share one sweeper, the seat has to be set up for several body sizes.
This page lays the adjustment ranges we publish side by side, so you can shortlist a seat before you write to us. Every cell is a value from our parameter sheets. A cell with no published value reads Ask the factory.
Three published bands. Four models publish none.
The overview covers operator weight setting, fore-aft slide and backrest angle for 14 models. Headrest and seat height adjustment follow in a section further down.
The table lists values as published and ranks nothing. The sheets of different models were written for different seats, so a gap in one column is a question for the factory and is not a statement that the seat lacks the adjustment.
| Model | Operator weight setting | Fore-aft adjustment | Backrest angle |
|---|---|---|---|
| KL01 | 50–130 kg | 160 mm: 80 mm forward, 80 mm rearward | 15–130° |
| KL11 | 50–130 kg | 176 mm: 80 mm forward, 96 mm rearward | Ask the factory |
| YL02 | 50–130 kg | 190 mm, 10 mm per step | Ask the factory |
| YS15 | 50–130 kg | 176 mm, 16 mm per step | 85° forward, 45° rearward, tolerance 5° |
| YJ03 | 50–130 kg | 175 mm | 35–170° |
| YS2-8 | 50–120 kg | Ask the factory | Folds forward, 27.5° rearward |
| YY01 | 50–120 kg | Ask the factory | Ask the factory |
| YY08 | 50–120 kg | 70 mm forward, 60 mm rearward | Ask the factory |
| YY53 | 40–120 kg | Ask the factory | 70–115° |
| YY03 | 40–120 kg | 150 mm | Ask the factory |
| YQ50 | Ask the factory | 120 mm | 30–60° |
| YQ40 | Ask the factory | 120 mm forward, 110 mm rearward, 23 steps | 80–121° |
| YL01 | Ask the factory | 90 mm forward, 60 mm rearward | Ask the factory |
| KL03 | Ask the factory | 70 mm forward, 120 mm rearward | Ask the factory |
Operator weight setting belongs to the suspension, and the sheets state it as a kilogram band.
If your operators span a wide weight range, put the lightest and the heaviest figure into the enquiry, and we reply with the models whose published band covers both.
For the suspension side, see suspension seats, mechanical suspension seats and air suspension seats.
KL01 and KL11 are mechanical suspension seats from the forklift line. YJ03 is an air bag seat with a 24 V air pump motor, so a sweeper chosen on this model needs a 24 V supply on the machine. YS15 gives a travel range of 40–110 mm and no suspension type on its sheet, and the factory states the type on request.
YS2-8 gives a travel range of 40–110 mm and no suspension type on its sheet, and the factory states the type on request.
YY53 is a mechanical suspension seat from the forklift line.
The sheets of these four models carry no weight band. Ask the factory.
Slide values come in two forms on our sheets: a total, and a split into forward and rearward travel. Where a model publishes only a total, we do not split it. Where it publishes a split, the split is shown.
| Form | Published values |
|---|---|
| Total only | YL02 190mmYS15 176mmYJ03 175mmYY03 150mmYQ50 120mm |
| Forward and rearward | KL01 80 and 80mmKL11 80 and 96mmYQ40 120 and 110mmYL01 90 and 60mmYY08 70 and 60mmKL03 70 and 120mm |
| Step size | YL02 10mm per stepYS15 16mm per stepYQ40 23 steps |
| Not published | YS2-8, YY01 and YY53Ask the factory |
YY08 is listed by its parameter sheet values. Its drawing carries a different figure, and the sheet is the reference. For the mounting side of a slide fit, put the free distance ahead of the seat mount and behind it into the enquiry.
Backrest angle is published for seven models, a headrest is listed as an option on six, and seat height adjustment is published for one.
| KL01 | 15–130° |
|---|---|
| YJ03 | 35–170° |
| YQ40 | 80–121° |
| YY53 | 70–115° |
| YQ50 | 30–60° |
| YS15 | 85° forward, 45° rearward, tolerance 5° |
| YS2-8 | Folds forward, 27.5° rearward |
The other models carry no backrest figure on their sheets.
A headrest is listed as an option on these six. On YJ03 the drawing gives a headrest adjustment of 120 mm up and down when the headrest is fitted. For the other five the sheet lists the headrest and gives no adjustment range, so the range is a question for the factory.
YQ50 publishes a seat height adjustment of 60 mm, and its drawing marks air bag suspension. No supply voltage is stated on the drawing, so it goes into the enquiry. For the other models, seat height adjustment is Ask the factory.
Write the adjustments your sweeper needs as figures in the first message: the weight band, the slide, the backrest stops, and whether a headrest is fitted on every unit or on request.
Our sheets hold no data specific to street sweepers.
Ask and we send the parameter sheet of the model, the drawing where one exists, and copies of the ISO 9001:2015, CE, RoHS and REACH certificates. Factory visits are booked in advance.
We match from your machine. A distributor sends the end customer's sweeper model and old seat photos, and the reply goes back to the distributor.
The reply names a model and attaches its parameter sheet. The full routine is on seat fitment and compatibility.
Email [email protected] with the sweeper model, old seat photos, base hole pattern, voltage and the adjustment ranges you need. We reply with a matching model and its parameter sheet. The contact page has the full details.